I first read about using cinder blocks to build a planter on A Minneapolis Homested's Dreaming of Concrete Blocks post last fall. I fell in love with this idea right away, and knew I had found the perfect solution for my ugly corner!
This planter looks great, and it was inexpensive to create. The cement blocks are only $1.00 each; which came to $16 total for my planter. I needed more dirt than I expected, and the dirt ended up costing almost as much as the block. But I still built the whole thing for under $30, an amazing price for a planter this size!
|Planter made out of cinder blocks|
Now, on to the fun part... The first thing I did was set up the block to create a design I liked. I was hoping to come up with a really cool design, but I wanted to planter curved so that made it more difficult.
|Building the planter design|
|Cinder blocks can be different|
I played around with different block placements until I figured out the basic idea of what I wanted. If you end up doing this, make sure you take a picture of your design. I took a picture purely for the purpose of writing this blog post; and boy was I glad I did because I referred to it often as I built the planter. Here's my initial design...
|Initial planter design|
Once the design was done, I disassembled the block and started building the planter. The first row of block takes the longest because the blocks must be as level as possible. Once you get the first row level, the other rows go faster since they can simply be stacked on top. I recommend waiting to fill the block with dirt until you're done with the whole row. Blocks filled with dirt are a pain to move and re-level, I learned that the hard way.
|First row of block must be level|
Once I started filling and stacking the blocks, I realized that most of the blocks on the bottom won't have plants in them. Of course, I bought high quality potting soil for the plants. If I would have thought of this at the start of the project, I could have cut my soil cost in half by using cheap fill dirt or rock for the blocks that won't have plants in them. Live and learn.
After adding the second level of block to my planter, I discovered my curved design created gaps that made filling some of the holes impossible because the dirt would just fall out the bottom. Oops!
|Gap between curved blocks|
|Wire fencing to support the dirt|
Then I laid landscape fabric over the wire fencing, and placed the block on top. Whew, that did the trick!
|Landscape fabric to hold in dirt|
When the planter was done, I filled it with zone 4 hardy succulents. Once they fill the planter and cascade over the sides, it'll look even more amazing.
I am thrilled with the way this planter turned out, it's perfect in the corner of my new Succulent Zen Garden!